Game Is Hard Level 230 Breakdown
What You See
A ball sits at the center of three concentric circular rings, each with a gap in it. The instruction is "take the ball out." You drag each ring to rotate it, and the ball only escapes when all three gaps line up into a single path leading to an opening in the outer edge.
Why You're Stuck
I rotated the rings until the gaps looked aligned, but the ball just rattled around and never left. I did not realize the gaps had to form a continuous channel from the center all the way out, and that I had aimed at the wrong exit. The rings also needed different amounts of spin, so my "close enough" alignment was never enough.
The Answer
Align all three rings so their gaps form one continuous opening from the center to the bottom-left edge. The exact spin is: outermost ring counter-clockwise twice, middle ring counter-clockwise once, and innermost ring clockwise once. Then the ball rolls free.
How to Beat It
- Step 1: Spin the outer ring: Rotate the outermost ring counter-clockwise twice to bring its gap toward the bottom-left exit.
- Step 2: Spin the middle ring: Rotate the middle ring counter-clockwise once to line its gap up with the outer ring.
- Step 3: Spin the inner ring: Rotate the innermost ring clockwise once so its gap connects the center to the rest of the channel. The ball then escapes through bottom-left.
Troubleshooting
- Ball will not come out: The three gaps must form one continuous path from the exact center to the outer edge — a near alignment is not enough.
- Which exit do I aim for?: Bottom-left. The rings can be aligned to different openings, so make sure you target the correct one.
- Do all rings spin the same way?: No. Outer is counter-clockwise twice, middle counter-clockwise once, inner clockwise once.
Why It Works
The maze is solved by matching up three rotating gaps into a single line. Because the rings are concentric, each gap contributes one segment of the path, and the difficulty is purely in getting their rotations to agree. Once you know the target exit and the per-ring spins, it is a short, mechanical sequence.
The Rule to Carry Forward
In rotating-ring puzzles, the goal is a continuous channel — line up every gap as one line, and pick the correct exit before you start spinning.
- Know the exit first: Determine which edge opening is correct, then work the rings backward from there.
- Continuity is binary: Either the whole channel lines up or it does not — partial alignment fails.
- Track each ring's spin: Different rings may need different directions and counts; keep them straight.
Work from the outside in: set the outer ring to the exit, then align the middle and inner rings to it.
Aligning the gaps to the wrong exit, or stopping at a near-alignment that leaves one ring a notch off.
Get the Official Game
Game Is Hard Level 230 FAQ
How do I move the circular rings in Game Is Hard Level 230?
Tap and drag each ring to rotate it independently, clockwise or counter-clockwise.
My rings are aligned but the ball won't come out in Game Is Hard Level 230?
Make sure all three gaps form one continuous opening from the center to the outer edge — the correct exit is bottom-left.
Do I rotate all rings the same direction in Game Is Hard Level 230?
No. Outermost is counter-clockwise twice, innermost clockwise once, and middle counter-clockwise once.
More Game Is Hard Help
This is one guide in a complete Game Is Hard index — every stage we've solved is listed on the home page.